Cisco CCNA / CCNP Certification Exam Tutorial: Floating

Cisco CCNA / CCNP Certification Exam Tutorial: Floating Static Routes

To pass the Cisco CCNA and CCNP certification exams, as well as becoming a world-class networker, you’ve got to know how and when to use floating static routes. And if you’re wondering what makes them “float” — read on!

In this example, R1 and R2 are running OSPF over a Frame Relay network, 172.12.123.0 /24. They’re also connected by a BRI ISDN link, 172.12.12.0 /24. R1 is advertising a loopback network, 1.1.1.1 /32, via OSPF. We want R2 to have a route to that loopback even if the frame goes down – and here, we’ll use a floating static route to make that happen.

R2 sees the route to the loopback interface via OSPF, and can ping that interface successfully.

R2#show ip route ospf

1.0.0.0/32 is subnetted, 1 subnets

O 1.1.1.1 [110/65] via 172.12.123.1, 00:00:02, Serial0

R2#ping 1.1.1.1

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 68/68/68 ms

This is when it’s...