Cisco CCNA / CCNP Tutorial: Home Lab Assembly Case Study
Part of your CCNA / CCNP education is deciding what network topology to use when you’re putting together your home lab. Some of you are starting with one or two routers or switches, while others are starting with more. A customer recently sent me a list of his Cisco routers and switches that he has available for a home lab and asked for my help in coming up with the best way to use them.
There is no “right” or “wrong” answer to this question; again, part of the learning process is configuring and reconfiguring the physical topology of your lab. Let’s look at the routers and switches he has available, including the interfaces on each, and come up with one possible CCNA / CCNP home lab setup.
The equipment list:
Two 3620 routers. Each has 1 serial port and 2 ethernet ports.
One 3640 router. This has two ethernet cards, each with two ports, and two AUI ports.
Three 2503s, my personal favorite for home labs! These have 1 AUI port, 2 serial interfaces, and one BRI interface apiece.
One 2524 router. This has one serial port, 1 ethernet...