Cisco CCNA Exam Tutorial: Split Horizon And Hub-And-Spoke Networks
For CCNA exam success, you had better know what split horizon is, how to turn it off, and when to turn it off. Knowing when to turn split horizon off is also important in production networks, because it can cause a hub-and-spoke network to have incomplete routing tables on the spokes.
Split horizon exists for a very good reason – routing loop prevention. The rule of split horizon states that a router cannot send an advertisement for a route out the same interface that it came in on. Split horizon is on by default on all interfaces running RIP, IGRP, and EIGRP.
In this CCNA tutorial, R1 will serve, as the hub and R2 and R3 will be the spokes. We’ll first configure EIGRP over the 172.16.123.0 /24 network, the network connecting the three routers.
R1#conf t
R1(config)#router eigrp 100
R1(config-router)#no auto-summary
R1(config-router)#network 172.12.123.0 0.0.0.255
R2#conf t
R2(config)#router eigrp 100
R2(config-router)#no auto-summary
R2(config-router)#network 172.12.123.0 0.0.0.255
R3#conf...
To view and download this full PLR article, you must be logged in. Registration is completely free. Once you create your account, you will be able to browse, search & downlod from our PLR articles database of over "1,57,897+" on 1,000's of niches and 200+ categories without paying a penny. Click here to signup...
