Having spent hundreds or even thousands on a personalised registration number many people put very little thought into how to fix the physical number plates to their car if this is not done correctly the appearance of their pride and joy can quickly go downhill. In the past number plates were drilled and fixed to the car with self tapping screws , with the advent of plastic bumpers and double sided tape plates are now usually stuck to the car.Both methods have advantages and pitfalls which will be discussed here. Drilling the plates and fixing with screws gives a good solid mounting but sometimes the screw heads can alter the look of the registration number if they land close to or in a digit , also water can seep into the holes and separate the reflective and acrylic over time, ruining the number plate. Before deciding to drill , work out where the screw heads will be and if you do drill ,start from the front face and stop just as the drill breaks through , then flip the plate over and drill from the back , this will prevent seperation of the reflective from the acrylic.To ensure that the plates are level and postioned correctly tape the old plates over the new ones and drill...
To view and download this full PLR article, you must be logged in. Registration is completely free. Once you create your account, you will be able to browse, search & downlod from our PLR articles database of over "1,57,897+" on 1,000's of niches and 200+ categories without paying a penny. Click here to signup...
